Full-Length LED Mirrors NZ: 500×1500 vs 700×1700mm
Quick answer: A 500 × 1500mm full-length LED mirror is a more compact choice for a dressing space, while a 700 × 1700mm design gives you a noticeably wider and taller mirror. Both sizes are offered in Mirror World's full-length backlit LED dressing mirror range. The right one depends on your clear wall space, how far you usually stand from the mirror and where you want the light to fall.
When you search for a full-length mirror in New Zealand, it is easy to compare photos and forget the dimensions. A good full-length mirror needs to work in your actual room, not only on a showroom wall. This guide focuses on practical sizing, illumination and installation considerations before you buy.
500 × 1500mm versus 700 × 1700mm: what changes?
| What to compare | 500 × 1500mm | 700 × 1700mm |
|---|---|---|
| Mirror width | 500mm | 700mm |
| Mirror height | 1500mm | 1700mm |
| Relative feel | Neater, space-conscious proportions | Broader, more dramatic proportions |
| Good starting point | A smaller dressing zone or limited clear wall width | A larger dressing area or a stronger full-length statement |
| What to measure | Wall width, mounting height and surrounding clearance | Wall width, mounting height and surrounding clearance |
The larger option adds 200mm in width and 200mm in height. That sounds modest on paper, but it affects visual balance, the amount of wall you need and the scale of the mirror beside a wardrobe, vanity or doorway. It does not automatically mean every person will get a better reflection: placement and viewing distance matter too.
Where will you use your full-length LED mirror?
Bedroom or dressing area
Start by measuring the space where you normally get dressed. Think about the distance from which you will stand, nearby furniture and whether the mirror would face a window or another light source. A backlit mirror is a decorative source of light; consider your room's existing lighting for everyday tasks.
Hallway or entry
A full-length design can make an entry feel considered, but make sure the proposed location does not interfere with doors or circulation. Check its installed projection and clearances against the manufacturer's dimensions instead of assuming a mirror can go flush to any surface.
Bathroom or ensuite
If you are planning a bathroom, measure around splash areas, fixtures, sockets and your other lighting. A full-length mirror may be a beautiful addition, but a mirror intended for dressing is not automatically the best choice above a vanity. Compare the NZ vanity and LED mirror size guide when planning the sink area.
What difference does backlighting make?
Backlit LED mirrors produce an illuminated effect around the mirror rather than relying on a conventional exposed light fitting. Mirror World's full-length range is listed with three light-colour selections and dimmable illumination. You can choose lighting to suit the atmosphere of the room, while the rest of your lighting plan provides any extra task lighting you need.
Think about the difference between a decorative halo and light directed towards your face. If that distinction matters to your morning routine, read our backlit versus front-lit LED bathroom mirror comparison. Check the individual model specifications rather than assuming that every LED mirror throws light in the same direction.
Five checks before ordering a full-length LED mirror
- Confirm the exact dimensions. The product has a 500 × 1500mm and a 700 × 1700mm variant. Measure both your proposed wall space and the clearance around the installation location.
- Check the mirror's orientation. Choose the configuration shown in the product's specification documents; do not assume another orientation is supported.
- Plan electrical access. The product information discusses plug-in or hardwired connection. Check the installation instructions for your selected variant, and use a suitably qualified electrician for fixed electrical work.
- Think about the lighting effect. Three colour selections and dimming help you tune the look, but the mirror is part of the overall room lighting plan.
- Check delivery and warranty terms. The range advertises a five-year warranty. Confirm the product-specific terms and eligible NZ delivery conditions before placing your order.
Is a full-length LED mirror better than a standard full-length mirror?
A standard mirror reflects the room's available light. An illuminated full-length mirror adds integrated lighting and creates a different visual effect. Whether that upgrade is worth it depends on your space, the lighting you already have and how much you value the design. Do not choose solely on the word “smart” or “premium”; compare dimensions, lighting controls, installation requirements and total purchase cost.
Frequently asked questions
Which is better: 500 × 1500mm or 700 × 1700mm?
Choose the smaller size if it suits your measured space and preferred proportions. Choose the larger one if you have the wall area and want a wider, taller presence. Neither is automatically the better fit for every room.
Are these full-length mirrors suitable for a bathroom?
Suitability depends on the exact model, its electrical specifications and the location where it will be installed. Confirm the relevant specifications and installation instructions for your space rather than inferring suitability from the product photograph.
Can the lighting be adjusted?
Mirror World's listed full-length backlit range includes three light selections and dimming. Check your selected variant for the full control and electrical specification.
Can I compare other shapes?
Yes. If you need a mirror above a vanity instead of a dressing mirror, browse Mirror World's round, rectangular, oval and Radar LED bathroom mirror range.
Find your full-length mirror at Mirror World
One room. The right proportions. The finishing touch. Compare the two available sizes, review the installation documentation and choose the design that suits your home. View the Full-Length Backlit LED Dressing Mirror →
